|
|
Cherry Bomb Classic |
|
The Original Genuine Stateside Cherry Bomb
With a straight through silencer design for easier engine breathing for maximum performance, and that deep power sound. They are constructed from heavy gauge steel with 360 degree welded ends. With glass packing and a heat resistant cherry red finish.
There is a particular design explanation why Cherry Bombs have been so popular for so long: Almost any half-decent exhaust will improve horsepower over mass produced, often crude, factory systems, Cherrys go one step further by also producing a unique sound by deadening the higher tinnier exhaust notes but allowing the deeper bass tones to come through - making every motor sound throatier and deeper than with another silencer.
These silencers (when mated with the appropriate tubing) enable owners to design and construct their own system, or just change their backbox
see here for cut away views explaining this design feature & fitted photos
Note that the lengths quoted is the length of the silencer body, not including the fitting sleeves at either end, which are approx 1" except in the case of stepped sleeves which are longer (these sleeves will slot inside or outside the pipe you are fitting the silencer to and so do not add to the fitted length)
Inlet/Outlet sizes quoted are Internal Diameter
|
| |
(Click to Enlarge)
|
Cherry Bomb Silencer Standard 3" Body
Length including fitting sleeves 18" (460mm). Length excluding fitting sleeves 12" (305mm)
Inlet & outlets constructed with a built in a stepped sleeve reducer at 38 and 45mm (enlarge pic to see)
Silencer width 75 mm (3")
|
| |
(Click to Enlarge)
|
Cherry bomb Silencer Custom Made 3" Body
Choice of length as below
Inlet and outlet width 50 - 57mm (choice)
Silencer body width 75 mm (3")
Custom made to order - please allow 10 days before despatch
|
| |
(Click to Enlarge)
|
Cherry Bomb Silencer Large Custom Made 4" Body
Choice of length as below
Inlet and outlet width 50 - 65mm (choice)
Silencer body width 100mm (4")
Custom made to order - please allow 10 days before despatch
|
| |
(Click to Enlarge)
|
Cherry Bomb Silencer Huge Custom Made 5" Body
Choice of length as below
Inlet and outlet width 50 - 65mm (choice)
Silencer body width 128mm (5")
Custom made to order - please allow 10 days before despatch
|
| |
(Click to Enlarge)
|
Cherry Bomb Tail Silencer Round
This is the final section of your custom-built road or competition exhaust system.
This item is supplied with a rolled end which is suitable for SVA testing on kitcars
Overall length 483mm
Inlet width 55mm (stepped sleeve)
Silencer width 90mm
Tailpipe width 65mm
Chrome plated or stainless rolled tailpipe section
|
| |
(Click to Enlarge)
|
Cherry Bomb Tail Silencer Oval
This is the final section of your custom-built road or competition exhaust system.
Overall length 483mm
Inlet width 50mm
Silencer width 90mm
Tailpipe width 85mm
Chrome slashcut oval tailpipe
|
| |
(Click to Enlarge)
|
Cherry Bomb Bracket Hangers
Makes fitting easy
Suits all cherry bombs & tail bombs including oval
|
| |
(Click to Enlarge)
|
Cherry Bomb Decal
Want a sticker for your cherry bomb?
Measures 103mm by 546mm
Free when you buy a cherry bomb, just add it to your cart. 1 per cherry purchased.
|
| |
|
Reducers, Mounts, Clamps etc
To mount your cherry to any existing pipework
For details of these products please see here
|
| |
|
|
|
