|
Battery Terminals Brass
Electro-plated brass heavy duty battery terminal clamps
Suit all round post batteries
Standard issue battery terminals, nothing special about them, but cheaper than you will find anywhere else
Sold as a pair
|
| |
|
Battery Terminals Lead
Forged Lead
Suit all round post batteries
Sold as a pair
|
| |
|
Battery Terminal Fast Release Brass Nut
Brass construction
Large wing nut allows quick release of battery without tools
Useful if your vehicle is kept in storage for periods and you wish to recharge battery, or for quick battery swaps
Long stud permits additional power connections
Best quality marine forged terminals
Sold as a pair
|
| |
|
Battery Terminal Fast Release PVC Nut
Large wing nut allows quick release of battery without tools
Useful if your vehicle is kept in storage for periods and you wish to recharge battery, or for quick battery swaps
Long stud permits additional power connections
Best quality marine forged terminals
Sold as a pair
|
| |
(Click to Enlarge)
|
Battery Quick Disconnect
Battery terminal & isolator assembley
Fits all top post batteries
Install on battery terminal post & simply connect battery cable to back of the switch
To engage power just hand tighten the green knob and just slightly loosen the green knob to disconnect all power. The green knob can also be completely removed to discourage unauthorized use.
Eliminates battery drain, reduce the risk of electrical shorts and fires, and quickly isolate your battery for safe vehicle servicing
Click pic for fitted example
|
| |
(Click to Enlarge)
|
Battery Quick Disconnect with Bypass Fuse
As above but complete with inline fuse to enable continued operation of small drain circuits when battery is disconnected.
Maintains current to electrical items that continue to operate when ignition off (eg time clock, stereo memory settings)
15 amp fuse fitted
|
| |
|
Battery Quick Disconnect Bulk Buy
We know many traders (and ebay traders) and forum "group buys" purchase these from us for resale - and are always asking for a quantity discount. So here you are: buy 10 Disconnects at £30.00 - half price
|
| |
(Click to Enlarge)
|
24c Gold Plated Battery Terminals Pair
Gold plated battery terminals
24c gold, best quality terminals on the market.
Knurled nut for ease & speed of connection
Includes gold plated allen head grub screws
4 inputs / cable ports (1 x 1/0GA 1 x 4GA 2 x 8GA)
Gold plating presents best seal and minimal resistence. Ideal for additional systems, in-car entertainment, amplification, heavy-load lighting or power inverter charging systems
Also enhances underbonnet appearance.
Supplied as a pair
|
| |
(Click to Enlarge)
|
Batlock
This innovative American product enables tool free instant battery connection/disconnection.
For the performance & other users who frequently change their battery.
Quick disconnect prevents drainage of battery—no damage to battery posts during removal!
Installation and removal is safe and fast—quick and easy connect and disconnect!
Tighter connections with no tools needed! Increases safety—no tool application system reduces the likelihood of creating sparks. Helps prevent corrosion lock & contact loss due to vibration. Quick release handle makes for easier installation and removal of battery.
Supplied as a pair for both battery terminals
click for more details on the manufacture's site here
|
| |
(Click to Enlarge)
|
Battery Bolt Extenders
For easy and reliable direct connections to the battery
Studs accommodate one or several 3/8" ring terminals
Excellent for trailer brake controls, ICE amplifiers and other accessories requiring direct power
Direct-to-battery power circuits help reduce noise in stereo, communication and other electronic equipment. Solid brass with matching nut.
|
| |
|
Battery Isolator
Battery isolator (also known as cut-off or kill switch)
Max load 1000Amp @12Volt for 10 seconds, 500Amp @24Volt for 10 seconds
Robust construction with copper terminals, 2 keys and rainproof key shaft cover
Suits 12 or 24 volt
A very simple way to isolate vehicle electrics. Can be used either as an Anti-Theft device or to isolate either the starter battery from the rest of the vehicle or auxilliary batteries from the charging system.
On our version the turn tab on the base of the key is steel, versions with this section in plastic tend to break rather quickly necessitating the purchase of another key.
Supplied with 2 keys
|
| |
|
Battery Isolator Key Only
Suits all standard type (not FIA type) battery isolators.
Good quality version with steel turn tab on base
|
| |
(Click to Enlarge)
|
Battery Isolator FIA Approved
FIA approved version of the above
100Amp at 12volt continuous, 500Amp for 5 seconds.
Built in Secondary switch to isolate the ignition circuit, a vital safety factor in competition use. At the same time the main electrical circuit is earthed through a 3ohm 11watt resistor to prevent surge and protect the alternator circuit.
Supplied with 1 key
Can be flush mounted to a panel (maximum 12mm thick).
Requires a mounting hole 22mm and 2 x 6.5mm bolt fixing holes 37mm apart
Suit 12volt & 24Volt
|
| |
(Click to Enlarge)
|
Battery Isolator Lucas Type SSB103
For all you concous buffs, this is a very good reproduction of the original Lucas battery isolator which is often seen on Austin Healeys and an option or period accessory on a wide range of British Classics
|
| |
(Click to Enlarge)
|
Lucas Type Battery Cut Off Classic Type
Butterfly battery cut off switch
Fits 19 mm hole, 83mm height 42mm diameter.
Metal bodies
300 amp continuous at 12V
12 volt or 24 volt
|
| |
|
Battery Isolator Heavy Duty
Marine Type Isolator - will control a bank of several batteries
300A continuous, 1000A momentary (10 second)
Can be surface or panel mounted
Overall height (excluding removable key) 67mm, height above panel fitting surface 31mm (if panel mounted)
ABS, copper, chrome construction
|
| |
|
Battery Lead Positive
Heavy duty 16mm2 cable
|
| |
|
Battery Lead Negative
Heavy duty 16mm2 cable
|
| |
(Click to Enlarge)
|
Lucas Vintage Battery Lead
Stamped "LUCAS PATENTED"
Correct fitment for many 1930s to 1960s vehicles
12" long, terminal hood one end, ring terminal the other
|
| |
|
Solenoid Lead
Heavy duty 16mm2 cable
61cm (24")
|
| |
