950 litre UN approved Bunded Site Fuel Bowser

CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and ‘A’ frame drawbar.
AXLE/SUSPENSION Single solid beam axle welded to chassis and fitted with 2 No. 4 stud unbraked hubs.
WHEELS AND TYRES 2 No 185x13x6 ply commercial van tyres fitted to 4 stud 5½ " pcd rims.
COUPLING 2” forged solid ring eye.
ANCILLARY EQUIPMENT Rear support stand, front sliding prop stand.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door fitted with stainless steel hinge and fully lockable.
Bund contains 110% to hinge line.
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene. 2” filler cap and chain. 1” vent valve, top mounted 1/2" BSP suction and return connections. Gate valve in base of tank, to pump. 1/2” pressure relief valve in tank top.
PUMP K1 Semi-rotary hand pump c/w 15’ of 1” fuel hose, trigger nozzle and stowed on bracket. In-line ‘Y’ strainer.
FINISH Primer and two top coats,(RAL1007 Daffodil is standard)
DIMENSIONS Approximately :-
Width 1.448m (57”)
Length 3.022m (119”)
Height 1.371m (54”)
Unladen Weight 450kg
Gross Weight 1450kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency, E.E.C. & Control of Pollution (Oil Storage) Regulations 2001 No 2954 for the carriage & storage of Fuel Oils. U.N. APPROVAL 31HA1/Z/ /GB/TRAILER-5186/0/1245

950 litre UN approved Bunded Highway Fuel Bowser

CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and ‘A’ frame drawbar.
AXLE/SUSPENSION Single Avonride torsion beam axle and fitted with 200 x 50 Auto reverse brakes on 4 stud 5 ½”pcd hubs
WHEELS AND TYRES 2 No 185 x 13 x 6 ply radial tyres fitted to 4 stud 5 ½” pcd rims.
COUPLING Knott 2000kg posibrake over run auto reverse c/w spring assisted handbrake lever, breakaway cable & 40mm ring eye or 50mm ball.
ANCILLARY EQUIPMENT Moulded mudguards, rear support stand,telescopic
front jockey wheel, full road lighting c/w 7 pin plug.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of inner tank. 4 lifting eyes & fork truck sockets.
PUMP K1 semi rotary hand pump c/w in line ‘Y’ strainer15’ of hose & trigger nozzle
INNER FUEL TANK Constructed from translucent heavy duty polyethylene with a capacity of 980 Litres. 2” filler with cap & chain. 1” vent valve, ½” top mounted suction & return connections. P.R.V. in tank top. Bottom outlet valve .
FINISH Primer and two top coats, (RAL1007 Daffodil is standard)
DIMENSIONS Approximately :-
Width 1.498m (59”) Gross Weight 1500kg
Length 3.530m (139”)
Height 1.524m (60”) Unladen Weight 476kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency, E.E.C. & Control of Pollution (Oil Storage) Regulations 2001 No 2954 for the carriage & storage of Fuel Oils.
U.N. APPROVAL 31HA1/Z/ /GB/TRAILER-5186/0/1245

2140 litre UN approved Bunded Site Fuel Bowser

CHASSIS Constructed from 4 x 2 RSC fully welded with front
standing plate and ‘A’ frame drawbar.
AXLE/SUSPENSION Single solid beam axle fitted with H/D 6 stud 205mm
Pcd hubs fitted with taper roller bearings..
WHEELS AND TYRES 2 No 10.5 x 15 flotation tyres on 6 stud rims
COUPLING 2” forged welded ring eye.
ANCILLARY EQUIPMENT Telescopic screw jack on drawbar.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene
2” filler cap and chain. 2” vent valve, top mounted ½”
BSP suction and return connections. Ball valve in base
of tank to pump with secondary in line. P.R.V.
in tank top
PUMP K2 semi rotary hand pump fitted with 15’ of 1” hose
C/w trigger nozzle and stowed on bracket. In line ‘Y’
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, (RAL1007 Daffodil is standard)
DIMENSIONS Approximately :-
Width 1.803m (71”) Gross Weight 2780kg
Length 3.378m (133”)
Height 2.006m (79”) Unladen Weight 700kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency,E.E.C., & Control of Pollution (Oil Storage) Regulations 2001 NO. 2954 for the carriage & storage of Fuel Oils.
UN APPROVAL 31HA1/Z/ /GB/TRAILER-5194/0/2250

2140 litre UN approved twin axle Bunded Highway Fuel Bowser

CHASSIS Constructed from 100 x 50 RSC, with 5mm pressed channel section, fully welded with ‘A’ frame drawbar & front standing plate, pressed rear lighting channel.
RUNNING GEAR Avonride twin 1500Kg torsion beams fitted with 200 x 50 Auto Reverse brakes,
Gas strut assisted parking brake, break away cable, Knott 3000 Kg Auto reverse coupling fitted with 40 mm eye or 50 mm ball. 4 No 185 x 13 x 8 ply radial tyres on 4 stud 5 1/2” pcd rims, Tandem mudguards, Telescopic front jockey wheel. Full road lighting c/w 7 pin plug.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear hinged access door fitted with stainless steel hinge. Bund contains 110% of tank content
INNER FUEL TANK Constructed from translucent heavy duty polyethylene, baffled, 2” filler cap & chain. 2” vent valve, P.R.V.in tank top, 1/2” bsp suction & return in tank top, Ball valve in base of tank to pump .K2 semi rotary pump c/w 15ft of 1” diesel hose & trigger nozzle stowed on bracket. In line ‘Y’ strainer. All contained within lockable bund area.
FINISH Primer and two top coats, (RAL1007 Daffodil is standard)
DIMENSIONSApproximately :-
Width: 1.828m (72”) Unladen Weight: 900 kg
Length: 3.81m (150”) Gross Weight: 2900kg
Height: 1.98m (78”) Towing Height: (Level) 394m
Variations in towing height +25mm to-45mm
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Environmental Agency, E.E.C. & Control of Pollution (Oil Storage) Regulations 2001 No 2954 for the carriage & storage of Fuel Oils.
UN APPROVAL 31HA1/Z/ /GB/TRAILER-5194/0/2250

2140 litre UN approved single axle Bunded Highway Fuel Bowser

CHASSIS Constructed from 4 x 2 RSC fully welded with front standing plate and ‘A’ frame drawbar.
AXLE/SUSPENSION Avonride 3000kg rubber torsion beam fitted with Knott 300 x 60 auto reverse brakes operated via cables and rod.
WHEELS AND TYRES 2 No 750 x 16 x 12 ply radials fitted to 5 stud rims
COUPLING 3000kg posibrake over run auto reverse c/w
Spring assisted handbrake lever, breakaway cable, 40mm ring eye.
ANCILLARY EQUIPMENT Rolled steel mudguards, rear support stand, telescopic
front jockey wheel, full road lighting c/w 7 pin plug.
OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene 2” filler cap and chain. 2” vent valve, top mounted ½” BSP suction and return connections. Ball valve in base of tank to pump with secondary in line. P.R.V. in tank top
PUMP K2 semi rotary hand pump fitted with 15’ of 1” hose
C/w trigger nozzle and stowed on bracket. In line ‘Y’
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, (RAL1007 Daffodil is standard)
DIMENSIONS Approximately :-
Width 1.828m (72”) Gross Weight 2900kg
Length 3.81m (150”)
Height 1.98m (78”) Unladen Weight 900kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency,E.E.C., & Control of Pollution (Oil Storage) Regulations 2001 No. 2954 for the carriage & storage of Fuel Oils.
UN APPROVAL 31HA1/Z/ /GB/TRAILER-5194/0/2250

950 litre UN/IBC Bunded Skid Base Fuel Tank

OUTER TANK Constructed from 3mm Mild Steel, cylindrical in section,
Removeable top section, 4 lifting eyes on corners tank.
Built-in fort truck pockets in base of tank.
Hinged rear access door, fully lockable.
INNER TANK Constructed from translucent heavy duty polyethylene to
Prevent rust contamination of the fuel. 2” filler with cap.
2 No. ½” BSP suction & return connections mounted in the top
Of the inner tank for generator fuel line. ½” pressure relief valve,
Manual vent valve. Fuel contents visible through tank wall.
PUMP K1 Semi-Rotary hand pump c/w in line ‘Y’ Strainer.
15’ of 1” Hose c/w trigger nozzle stowed on a bracket.
FINISH Primer and two top coats, single British Standard colour.(RAL1007 Daffodil is standard)
DIMENSIONS Approximately:- Width 1155mm Gross weight 1245kg
Length 2014mm
Height 1245mm Unladen weight 390kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency, E.E.C. & Control of Pollution (Oil Storage) Regulations 2001 No 2954 for the carriage & storage of Fuel Oils. U.N. APPROVAL 31HA1/Z/ /GB/TRAILER-5186/0/1245

2140 litre UN/IBC Bunded Skid Base Fuel Tank

OUTER BUND TANK Cylindrical in section with removable top section for tank access. Rear access door, fitted with stainless steel hinge and fully lockable.Bund contains 110% of tank inner tank content.4 lifting eyes & fork sockets
INNER FUEL TANK Constructed from translucent heavy duty Polyethylene
2” filler cap and chain. 2” vent valve, top mounted ½”
BSP suction and return connections. Ball valve in base
of tank to pump with secondary in line. P.R.V.
in tank top
PUMP K2 semi rotary hand pump fitted with 15’ of 1” hose
C/w trigger nozzle and stowed on bracket. In line ‘Y’
strainer. All contained within lockable bund area.
FINISH Primer and two top coats, single British Standard colour.(RAL1007 Daffodil is standard)
DIMENSIONS Approximately :-
Width 1.535m Gross Weight 2550kg
Length 2.014
Height 1.646 Unladen Weight 623kg
Go to bottom of section for upgrades, e.g. electric pumps

Bowser complies with current Enviromental Agency,E.E.C., & Control of Pollution (Oil Storage) Regulations 2001 for the carriage & storage of Fuel Oils.
UN APPROVAL 31HA1/Z/ /GB/TRAILER-5194/0/2250

Bowser Upgrades

Popular upgrades to electric pumps are available to order on-line (see below), factory fitted.

We are also able to supply;
* wheel clamps (to protect your investment)
* Flow Meters
* 12 volt batteries wired into one of the 12 volt pumps
* Battery charger (built in)
* Auto nozzle in lieu of standard model
Contact us for prices and details.

110 or 240 volt Pumps

110 or 240 volt continuous duty 55 litres per minute pump fitted in place of hand pump

12 Volt Light Duty Budget Pump

12 volt light duty only 45 litres per minute pump fitted with 3 meters of cable and crocodile clips.
Please note, these pumps are not for heavy or continuous operation. They are a budget model, normally suitable for contractors and farmers who fill up once a day. Although the pumps have internal fuses, it is still possible to burn the motor out as they do not have thermal overload protection.

12 Volt Heavy Duty Pump

12 volt Heavy Duty, flameproof, 55 litres per minute pump with thermal overload protection and fitted with 4 meter cable and clips. Duty cycle 30 minutes per hour. Extremely robust and very reliable.