Starter Solenoid
Universal type, manufactured by Durite.
12 volt solenoid as fitted to most kit aircraft
|
Ray Allen G101 Stick Grip with PTT
The G101 grip is made of semi-soft UV and oil resistant foam. The upper switch housing is made of nylon with a lightly textured finish and is 4.75” (121 mm) tall.
A SPST switch located on the top of the G101 grip can also be used as a PTT button.
RAC grips are designed to fit a 1” stick diameter with spacers included for easy installation on 3/4”, 7/8” stick tubes.
|
| |
PTT push to make switch with gold plated contacts
Gold plated contacts for long life
Supplied with an optional, push fit, large button (left picture)
Fits a 6.5 mm hole
Solder terminals
High quality switch
|
PUSH-TO-TALK SWITCH - use with any headset.
Attaches to any control wheel. Simple installation, no tools required. Simply wrap the Velcro strap around control wheel. Provides instant communications when used with any headset. Features gold contacts for durability. With 6 ft. coiled cord, jack and plug.
|
| |
Toggle Switch
Toggle switch rated at 12volts 25amps. Silver contacts for longer life and 6.3mm spade terminals. Fits in a 12mm panel hole.
|
Toggle Switch On-Off-On
Silver contacts for long life
25 amps at 12 volts
12 mm panel hole
Screw terminals, but will also take push-on connectors.
|
| |
Toggle Switch with Off On plate
Off On plate is correct aviation configuration.
Dual circuit or single circuit use.
Will connect to 6.3mm terminals or attach wires by screw connectors.
Rated 12V 20A.
12 mm panel hole.
|
Toggle Switch with LED Warning Lamp
LED on the end of the toggle - Choose RED or GREEN.
Standard 6.3 terminals
Rated 12v / 25amps
Silver contacts for long life.
|
| |
Switch Cover
Spring loaded flip-up cover.
Fits the preceeding types of toggle switch.
13 mm mounting hole.
|
Mini Toggle Switch
Take up less space on any panel. Mini toggle is rated at 12v 6A and has solder terminals. Requires a 6 mm panel hole.
|
| |
Start Button
Large, heavy duty, push to make switch. Fits a 12mm panel hole.
5 Amp, suitable for activating a starter solonoid.
Aluminium Guard with height adjustment.
|
On/Off miniature rocker switch
Snap fits into a 19.5 x 13mm panel hole. Rated 10 amps at 12 volts. 4.8mm blade terminals. (see Terminals section for this size)
SORRY OUT OF STOCK
|
| |
On/Off Rocker Switch illuminated
12Volts
25 Amps
6.3mm blade terminals
Fits a 30mm x 11 mm panel hole
|
On/Off Rocker Switch
12 Volts,
20 Amps
6.3 mm blade terminals
fits a 30mm x 11mm panel hole
|
| |
On/Off single pole switch with LED indicator
Snap fits into a 20mm diameter panel hole. Rated 16 amps at 12 volts with 4.8mm blade terminals. (See Terminals section for 4.8mm terminals)
|
Red Illuminated round rocker switch
Same as above switch but complete button is illuminated when on.
Snap fits into a 20mm diameter panel hole. Rated 16 amps at 12 volts with 4.8mm blade terminals. (See Terminals section for 4.8mm terminals)
|
| |
Push Button Switch
12 Volts / 5 amps
Push to make switch
Mounts in a 22mm hole
6.3 mm terminals
|
12 Volt relay
4 blade, 40Amp, relay with mounting bracket.
Relays are like remote switches. Use them where high currents are involved, like a landing light. Or use them to isolate circuits when the master is switched off, such as the regulator sense wire, or power feed to the radio if directly connected to the battery.
|
| |
Battery Isolation Switch
Removable key
100 amps continuous
500 amps for 5 seconds
M8 post connectors
Removable splash proof cover
|
Momentary On Toggle Switch
|
| |
