Zing Ear ZE-700 Resettable Circuit Breakers
Single pole, thermal circuit breakers with manual reset. When an overload occurs, the contact opens, extending the reset button for visual indication. The breaker contains a trip free mechanism, which prevents resetting during an overload.
Fitted with standard spade terminals. Mounts in an 11mm panel hole - allow at least 50mm behind the panel for fitting. Used in commercial generators, compressors and other appliances. Rated 125VAC / 250 VAC and also suitable for DC current up to 36 Volts.
Non Aviation Customers - Welcome Google seems to direct a lot of general business here because few people are selling Zing Ear. Please feel free to make a purchase, you don't need a Pilot's Licence, just a credit card :-) There is no minimum order qty. and P & P is just £1.49 for up to 3 circuit breakers.
|
Zing Ear ZE800 Resettable Circuit Breaker
Panel mounting in 16 mm hole
Compact Facia is 18mm X 18mm
3 to 15A rated trip points
Switch style reset
Standard spade terminal connection
Miniature slimline circuit breaker ideal for panel mounting - an overload will trip the contacts, extending the reset switch on the front bezel. Mechanism is tripfree, body is entirely plastic with standard push-on tabs at the rear.
|
| |
Potter & Brumfield Tyco W58 Srs Circuit Breakers
W58 Series circuit breakers have a recessed reset button with a red band that becomes visible once tripped.
Original equipment on Cessna and Piper
Amp Rating printed onto the end of the button.
Screw terminals - and fits in a 12 mm panel hole
|
Potter & Brumfield Tyco W58 Srs - 25 Amp Circuit Breaker
This is a W58 circuit breaker but for some reason the 25 Amp is a bit more expensive
|
| |
Potter an Brumfield Tyco W23srs Circuit Breaker
Combination Push/Pull Switch and Circuit Breaker.
Thermal Circuit Breaker as used by Cessna, Beech and Piper.
• May be used as on/off switch.
• Cannot be reset against overload.
• W23 has visible trip indicator.
• Screw termination.
• Trip-free operation.
• Fits into a 10 mm panel hole.
|
Potter & Brumfield W31 Switch and Circuit Breaker
Combination single pole switch and circuit breaker.
Ideal when panel space is very limited
Toggle switch has the rating inscribed on the tip.
Fits in a 12 mm panel hole.
|
| |
Spec Sheet for Potter and Brumfield Tyco Circuit Breakers
W23 series, W31 series, and W58 series
Click HERE for a pdf spec sheet
|
33V Transorb Voltage Surge Protector
This device is used for effective overvoltage protection of sensitive electronic equipment on your aircraft.
Sometimes several thousand volts can be induced in electrical systems when operating devices such as starter motors or solenoids. The surge protector clamps these voltages to an acceptable level suitable for electronic equipment.
Note: Fit between the +v and -v wires that feed the instrument bus. Not fitting such a device has been responsible for considerable damage occurring to radios and other electronic equipment on aircraft.
More info HERE
|
| |
10 way fuse box
Compact fuse box (6" x 2"), designed to accept standard blade fuses. Connect to cables using 6.3mm terminals. Two clear covers protect the blades. Fuses are not supplied, please select from the range below.
TIP Use as the basis for a fused bus bar by interlinking all the terminals on one side of the box, and taking power feeds via fuses of your chosen rating.
|
6 Way Fuse Box
Fuses are not included please select the ratings you require from the range below.
|
| |
4 Way Blade Fuse Box
Fuses are not supplied, please select from the range below.
|
In-Line Single Blade Fuse Holder
In-line fuse holder for blade fuses. Connects via 6.3mm terminals.
Fuse supplied separately, see section below.
|
| |
Blades fuses
Standard blade fuses for above fuse box and in-line fuse holder. Supplied in 9 popular ratings using the standard colour code.
|
AGC type Fast Blow Fuses
AGC-type fuses are glass-enclosed with a single fuse element. Fast acting to protect sensitive instruments and radios. Fuse dimensions 1/4" dia. x 1-1/4" long (32mm)
|
| |
Panel Mounted Fuse Holder
Takes 32mm / 1-1/4" fuses up to 35amps.
Fits into a 12.5 mm / 1/2" panel hole.
4.8mm push on terminals
Screw off by hand retaining cap
|
In-Line fuse holder
Fuse holder for glass fuses
|
| |
