Panel Power Socket
Build a power socket into your panel to run a GPS or phone charger. It takes a standard cigar lighter plug, just like the one in your car. This neat socket fits a 28mm hole and can handle 20 amps max. Wire via a fuse or cicuit breaker using standard spade terminals
|
DIN Socket with cap
More compact than a cigarette lighter socket
Rated at 16 amps
Fits into an 18mm panel hole
Suitable for DIN plugs
|
| |
Lighter Socket Plug
Fits the above socket and any other cigarette lighter socket.
Internal 8 Amp fuse
Remove the red tip to use in a DIN socket
|
DIN plug
Fits the above DIN socket
Rated at 16 amps
Screw terminals
|
| |
Twin Adapter for Lighter Socket
Plugs into existing lighter socket to provide two lighter sockets.
1m cable
Use in your car or in your plane.
|
Headphone Jacks
MIL-J-541 spec. with long life alloy springs. Insulation is by high dielectric strength phenolic plastic.
Tinned terminal lugs for easy soldering.
Supplied with threaded bush and nut for panel mounting.
Open circuit until plug is inserted.
Microhone Jack JJ-033
Price £5.41 £4.60 (Excl. vat)
Headphone Jack JJ-034 and
Stereo Headphone Jack SWL-12B
|
| |
Insulated Flat Washer
Insulated flat washer for headset. microphone jacks.
|
Insulated Shoulder Washer
Insulated shoulder washer for headset/ microphone jacks.
|
| |
.206" COMMERCIAL HEADSET MIC PLUG
(S-267) (PJ-068) Mates with JJ-033, S-12B, CES830. Black plastic handle with .206" dia. chrome plug. 3 conductors. solder plug and cable clamp.
|
.25" COMMERCIAL MONO HEADSET PHONE PLUG
(S-250) Mono (PJ055B) Mates with JJ-034. Black plastic handle with .25" dia. chrome plug. 2 conductors. solder plug and cable clamp
|
| |
BNC Coaxial Connectors
Male and Female high quality BNC connectors manufactured by Amphenol Connex.
Use with RG400 and RG58CU coax. Trim the coax cable ends to push fit inside the connectors and then crimp the collar to fix.
For coaxial cable please see the Aviation Wire section CLICK HERE
|
2 Pole Block Connector
Male and Female plugs with 4 crimp terminals. Make up your own plug and socket.
Plugs can only be connected one way to prevent short circuit.
|
| |
4 Pole Connector
Make up your own 4 pole connecting block.
Supplied as Male and Female parts with 8 crimp-on connectors
|
6 Pole Block Connector
Make up your own six way terminal block. 12 crimp connectors supplied.
The mouldings can be mounted into a panel or firewall using built in latches.
|
| |
Bus Bar 5 position
Tin plated copper bar rated at 100 amps
Two stainless steel studs
5 screw positions
ABS insulating base with recessed 5mm mounting holes
Length 105mm, Width 20mm, Height at the studs 35mm.
|
Bus Bar - 10 position
Tin plated copper bar rated at 150 amps
Stainless steel studs
10 screw positions
ABS insulating base with recessed 5mm mounting holes
Length 150mm, Width 35mm, Height at the studs 35mm.
|
| |
Bus Bar power distribution post - 8 Position
Compact round design with central post for power-in connector - use 6mm ring terminal.
Eight screw connectors for power distribution - use 4 mm ring terminals.
Length is 85 mm, Width is 45mm, Height of central post 55 mm.
|
