MS24693- Stainless Steel Screw
Used in most light aircraft to fix exterior trim, panels, spats, hinge pin retaining plates, etc. Replace your old chewed ones with fresh new 1/2" (C50) or 5/8" (C51)screws. 8 32 thread.
Price is per 10, includes vat, select quantity required.
|
1/4" Stainless Sheet Metal Screws (pack of 25)
Stainless steel screws (6 X 1/4" size) used to secure trim panels in fibreglass aircraft.
Sold as a pack of 25 screws
|
| |
Stainless Steel Nyloc Stop Nut for above screws
8 32 Thread suitable for use on above MS24693- screws.
Commercial quality stainless steel nyloc nut.
Price is per 10
|
AN960 Steel Washers
Standard thickness and 1/2 thickness "Light"
Cadmium plated or select Stainless Steel
Price is per 10
|
| |
AN970-3 Washer
They provide a greater bearing area than AN960 washers
|
A3135-SS-017 Stainless Steel Tinnerman Washer
Used with the above MS24693- screws on cowlings and spats.
Price is per 10
|
| |
AN365 Nyloc Nuts
Steel with Nylon locking insert
Cadmium Plated
Sometimes refered to as Stiffnut or Elastic Stop Nut.
TIP This type of nut should never be re-used, always use a fresh replacement.
|
AN365-C-1032 Certified Stainless Steel Nyloc Nut
Certified stainless version of the above AN3 aviation nut.
|
| |
AN365-C-428 Certified Stainless Steel Nyloc Nut
Certified aviation quality stainless steel AN4 nut
|
AN363 All metal Stop Nut (MS21045)
The AN363 all-metal stop nuts are designed for use in high temp installations (up to 450°F)where conventional nyloc type would melt. eg On brake parts.
|
| |
AN310 Castle Nuts
For use with drilled AN bolts, where the castle nut is secured with a split pin
|
AN3 Bolts - Undrilled for use with AN365 Nyloc Nuts
3/16" diameter shaft, hex head aircraft bolts made from high strength 4037 or 8740 alloy steel. Cadmium plated as per QQ-P-416A, Type II, Class 3.
Grip length is the unthreaded part of the shaft.
|
| |
AN4 Bolts - Undrilled for use with AN365 Nyloc Nuts
1/4" diameter shaft, hex head aircraft bolts made from high strength 4037 or 8740 alloy steel. Cadmium plated as per QQ-P-416A, Type II, Class 3.
Grip length is the unthreaded part of the shaft.
|
AN Bolts supplied to order
Can't find the bolt you want?
Parts For Aircraft is an appointed dealer for Aircraft Spruce, so if they have it in stock, we can supply.
Request a quote via the Contact Us tab above.
|
| |
Brass Instrument Screws
Brass (non-magnetic) nut, bolt and washer for mounting instruments in the panel.
M3 (3mm) size by 25mm (1") long.
M4 (4mm) size by 25mm (1") long.
Sold in a pack of 4 brass nuts, bolts & washers
|
Small Socket Head Cap Screw
Neat looking socket head cap screw ideal for mounting instruments in the panel. Head is 5mm across. Manufactured by Unbrako (self coloured steel)
M3 x 25 Socket Cap Screw with nut and washer.
Sold as a set of 4
|
| |
Stainless Steel Socket Button Head Screws
Another attractive option for mounting instruments or fittings, available in two sizes.
M3 (3mm) x 30mm or M4 (4mm) x 20mm (M4 Out of Stock)
Supplied as a set of 4 screws, nuts and washers.
|
Brass instrument screws (MS35214)
Black oxide finish, cross head screw.
Chose from 1/2" or 3/4" length
6-32 thread.
Sold as a set of 4 screws
|
| |
Brass Nuts for Instrument Screws (MS35649-265B)
Brass nuts with black oxide finish for MS35214-27 instrument screws. 6-32 thread.
Price for set of 4 nuts
|
AN416 Safety Pins - pack of 4
Two sizes. The larger pin is about 1-3/8" (35mm) and the smaller is about 1" (27mm) from end to end.
Supplied as a set of 4
|
| |
MS24665 Stainless Split Pins
Aviation quality AN381 stainless cotter pins sold in a pack of 20
1" long
Chose either 1/32" or 1/16" diameter.
|
WARNING
The competition hide their VAT we show both prices
Our Maximum shipping cost is just £5.86 including vat and 90% of orders are charged less. Prices start at just £1.47 for up to 100 grams
|
| |
CCC-32 Stainless Steel 3/32" diameter -Countersunk - pk10
Small Rivets Ideal for panel work
Grip length suitable for 1/8" (3mm) thick material.
Rivet is 1/4" long
Shear strength 230 lbs
Tensile strength 280 lbs
Much stronger than aluminium rivets
Countersunk Flush head.
Pack of 10
|
6ft Glide Free Control Cable
Simple design for push - pull operation
Low friction thanks to polyethylene liner
Stainless steel wire core in flexible metal casing
May be shortened
Max travel is 3.5 inches
Black plastic knob (red available to order)
Other lengths available upon request.
|
| |
Button Type Dash Control Cable
Button Type Dash Control designed for use with many control system applications. Easily installed. Operates smoothly. All adjustable parts are metal. 7/8" Dural button on 3/16" diameter shaft. Maximum travel is 2". Solid wire cable. Furnished in 5 ft. and 8 ft. length. May be shortened.
|
T-Handle Dash Control Cable - 8ft
T-Handle dash control manufactured from duralumin and brass. Locks positively, will not vibrate loose. One-fourth turn locks it in any position and will hold up to 200 lbs. Standard travel 2-1/2". T-handle is 1-3/4" wide with chrome finish. Can be mounted from front or rear of instrument panel. Cable is 8ft long, solid wire in a low friction flexible metal casing. Can be shortened.
|
| |
A-820 Friction Lock Control Cable - 5ft
The A-820 friction lock control provides positive locking at any power setting by turning the chrome collet locking nut. Solid wire cable running in a wound-wire casing that has a Teflon liner for low friction and heat resistance in high-temperature areas such as engine compartments. Travel: 3-3/8". The 1-1/4" dia. solid knob is black. The 5ft cable can be cut to length.
|
AN742 Cable Support Clamps
Plain loop-type cable support clamps, made of aluminium alloy meeting specification QQ-A-362, condition T. Heat-treated to a minimum tensile strength of 50,000 psi.
|
| |
