Copper Ease 20g Tube
Provides excellent protection for metal parts against seizure, corrosion, heat, rust, acid and water.
Withstands extremes of temperature from -40 to +1150 degrees C. Use on spark plugs, exhaust nuts and bolts, and anywhere as an anti-sieze assembly compound
|
NGK B6HS
Used in VW aircraft engine conversions.
|
| |
NGK D9EA -The Original Equipment Jabiru plug
NGK - The world's number one spark plug.
This is the plug that fits 4,6 and 8 cylinder Jabiru engines. NOTE plug does not have a terminal nut ferrule because that is the way NGK UK supply them. Unscrew your old ones and re-use.
|
DR9EA
The resistor version of D9EA
|
| |
NGK DCPR7E
NGK spark plug for the 80hp Rotax 912
Also the 130hp and 160hp Limbach L2400
|
NGK DCPR8E
NGK Spark Plug for the 100hp Rotax 912S
|
| |
Sealey Spark Plug Gapper
This gauge allows you to check and adjust the gap in a graduated ramp sequence.
Duel marked in Imperial units from .020" - .100" and Metric from 0.6 - 2.4mm
For standard feeler guage see below
|
Draper Imperial Feeler Gauge
10 blades in sizes:- 0.0015, 0.002, 0.003, 0.004, 0.006, 0.008, 0.010, 0.012, 0.015, 0.025 of an inch.
|
| |
NGK Suppressed Plug Caps LB05F & LB05E
Both are 5 k Ohm suppressed plug caps designed to reduce RF noise.
LB05F caps push-fit directly onto the screw thread on the D9EA or DCPR7E style of plugs. No need for a terminal ferrule.
LB05E caps fit conventional spark plugs with terminal ferrule like the NGK B6HS plug above or the plug used in Rotax two stroke engines.
Convert your existing leads
It's easy to convert existing leads, just cut off the old plug cap. These NGK plug caps have a threaded connector designed to simply screw into the cut end of the ignition cable. Comes complete with waterproof boots.
Other types of cap available on request
|
Carbon Core Ignition Cable
HIgh quality Durite cable. Silicon rubber sheathed and silicon rubber insulated for best electrical insulation and durability.
Suppressed carbon core for long life and minimum RFI (radio frequency interference). Just like in your car.
7mm o/d cable is ideal for the NGK caps listed above.
Price is per metre
|
| |
Plug Lead Distributor Boot
Make up your own plug leads using these terminal boots.
|
Plug Lead Distributor Terminals
Crimp on terminals for making up your own plug leads.
|
| |
Plug Lead Spark Plug Boot
Silicon rubber boot for high heat resistance.
|
Plug Lead Spark Plug Terminal
Crimp on connector for plug boot
Connector designed for plugs with a terminal ferrule.
|
| |
